New! RC10B84.1 & RC10B84.1D Team Kits

The Team Associated RC10B84.1 & RC10B84.1D are Engineered for Victory!

Unleash unparalleled performance with the RC10B84.1 & RC10B84.1D, 1/10-scale 4WD buggies engineered for precision, speed, and racetrack victories.

Designed with cutting-edge features, this competition machine delivers superior handling and control. Its molded height-adjustable gearboxes ensure optimized drivetrain efficiency. V2 Steering posts and bellcranks ensure reduced vertical movement in the steering rack, keeping your lines tight at every corner.

Fine-tune your setup with chassis bracing adjustments, giving you the flexibility to adapt to each track you race on. The RC10B84.1 & RC10B84.1D allow for precise weight distribution and chassis balance, letting you push the limits with confidence.

Enhanced aerodynamics come standard with a low-profile body and two rear wing mount heights. The RC10B84.1 & RC10B84.1D are finished with shock tower covers, 3.5mm turnbuckles and ballcups, and 13mm big-bore shocks, providing the ultimate blend of strength, precision, and performance, the RC10B84.1 & RC10B84.1D are your keys to placing at the top of the podium!

RC10B84.1 Team Kit Features:

• Wide Tongue Chassis for Improved Durability
• V2 Side Rails to Account for Wide Tongue Chassis
• Wide A and B Mounts
• 73mm Gull Wing Front Arm Suspension
• Carbon Fiber Front Shock Tower for 73mm arm Geometry
• Molded Front Shock Tower Cover for 73mm arm Shock Tower
• V2 Steering Posts and Bellcranks to Reduce Vertical Movement in the Steering Rack
• Long HD Differential Outdrives for the Rear Differential
• 66mm Rear CVA Bones
• New A and D mount 0.7mm shims
• Molded Front Bumper With Optional Bumper That Covers Anti-roll Bar Mounts
• Molded Height-Adjustable Gearboxes Front and Rear with Additional +2 Rear Gearbox for High-Grip Conditions
• Optimized Steering Bellcranks and Rack: improved bumpsteer control at all ride heights
• Chassis Bracing: Fine tune chassis flex characteristics with upper and lower chassis bracing front and rear
• Standard and HRC (High Roll Center) Rear Hubs Included
• Insert adjustable caster block with 0, +/-1, and +/-2 degree inserts included
• Forward and Back Motor Positions: used for further weight bias adjustment
• Highly Adjustable Battery Holder with Thumb Tabs: allows for easy battery removal and fine tuning of weight bias
• 2.5mm Thick Tapered 7075-T6 Aluminum Chassis with 10 Degrees of Kickup and Improved Departure Angle
• Decoupled Slipper Clutch Included
• Aluminum Center-Mounted Servo Mount
• Two heights Included for Rear Wing Mount
• 7-inch Rear Wing
• Low-Profile Body
• 3.5mm Turnbuckles and Ballcups
• 13mm Big-Bore Shocks

#90058

RC10B84.1 Team Kit
UPC: 784695900585
Available Pre-Order

RC10B84.1D Team Kit Features:

• Wide Tongue Chassis for Improved Durability
• V2 Side Rails to Account for Wide Tongue Chassis
• Wide A and B Mounts
• 73mm Gull Wing Front Arm Suspension
• Carbon Fiber Front Shock Tower for 73mm arm Geometry
• Molded Front Shock Tower Cover for 73mm arm Shock Tower
• V2 Steering Posts and Bellcranks to Reduce Vertical Movement in the Steering Rack
• Long HD Differential Outdrives for the Rear Differential
• 66mm Rear CVA Bones
• New A and D mount 0.7mm shims
• Molded Front Bumper With Optional Bumper That Covers Anti-roll Bar Mount
• Molded Height-Adjustable Gearboxes Front and Rear with Additional +2 Rear Gearbox for High-Grip Conditions
• Optimized Steering Bellcranks and Rack: improved bumpsteer control at all ride heights
• Chassis Bracing: Fine tune chassis flex characteristics with upper and lower chassis bracing front and rear
• Standard and HRC (High Roll Center) Rear Hubs Included
• Insert adjustable caster block with 0, +/-1, and +/-2 degree inserts included
• Forward and Back Motor Positions: used for further weight bias adjustment
• Highly Adjustable Battery Holder with Thumb Tabs: allows for easy battery removal and fine tuning of weight bias
• 2.5mm Thick Tapered 7075-T6 Aluminum Chassis with 10 Degrees of Kickup and Improved Departure Angle
• Center Differential Included
• Molded Ring and Pinion Gears Included
• Aluminum Center-Mounted Servo Mount
• Two heights Included for Rear Wing Mount
• 7-inch Rear Wing
• Low-Profile Body
• 3.5mm Turnbuckles and Ballcups
• 13mm Big-Bore Shocks

#90059

RC10B84.1D Team Kit
UPC: 784695900592
Available Pre-Order