RC8B4.1e Team Kit
The next evolution of the RC8B4 eBuggy is upon us. The heart of the buggy is the new RWB/FWB adjustable weight bias chassis design.
| RC8B4.1e Team Kit | ||
|---|---|---|
| 80950 |
MSRP: MAP: $669.99 |
In Stock
|
Vehicle Specifications
| Power Source: | Electric |
|---|---|
| Terrain: | Off-Road |
| Body Style: | Buggy |
| Scale Size: | 1:8 Scale |
| Assembly Level: | Kit* |
| Length: | 486mm (19.13in) |
| Width: | 304.5mm (11.99in) |
| Wheelbase: | varies |
| Weight: | varies |
| Internal Gear Ratio: |
3.38:1 |
| Drive: | 4WD |
* This vehicle comes as a kit and must be fully assembled by the user. Electronics and/or an engine/motor may be required.
Required to Complete
- 1:8 scale sized electric RC car motorâ€(#27405-27406 Reedy Power Sonic 866 Buggy Motors)
- 1:8 scale sized radio control electronic speed control (#27007 Reedy Power Blackbox 850R Sensored ESC or #27008 with Programmer 2)
- 2- or 3-channel radio/transmitter
- Batteries for radio-controlled car radio
- 2S shorty LiPo Battery Pack (2 needed, recommended for lowest CG) (#27382 Zappers SG5 7.6V 6400mAh Shorty LiPo or #27374 Zappers DR 7.6V 6100mAh Shorty LiPo)
- 4S LiPo Shorty Battery Pack (1 needed) (#27390 Zapper SG5 15.2V 6300mAh Shorty LiPo or #27371 Zapper SG4 15.2V 6100mAh Shorty LiPo)
- 1:8 scale buggy tires
- 1:8 scale buggy wheels
- CA (cyanoacrylic) glue (#1597 recommended)
- Polycarbonate-specific spray paint or polycarbonate-specific bottled paint and airbrush
- Thread-locking compound (#1596 FT Locking Adhesive recommended)
- Needle-nose pliers
- Hobby knife
- Reamer (#1499) or hole punch for making holes in body
- Ride height gauge
- Steering servo (#27153 RT5012A HV Digital Competition 1:8 Servo)
- Other helpful items: Silicone Shock Fluid. Silicone Diff Fluid. Body Scissors (#1737 FT body scissors recommended). Reamer (#1499) / Hole Punch. Shock Pliers (#1675 recommended). FT Hex Wrenches: (#1518, #1506). FT Nut Drivers (#1519 recommended). Hobby Knife. Needle Nose Pliers. Wire Cutters. Calipers or a Precision Ruler. Turnbuckle Wrench (#1114 recommended).
